Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced N4U41 LS BK - PA9T FR(40) - BASF

Material Data Center offers the following functions for Ultramid® Advanced N4U41 LS BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
部分芳香族、阻燃聚邻苯二甲酰胺，可用于注塑成型。具有出色的电气和机械性能、良好的长期热稳定性和对高应力部件的出色耐化学性。该阻燃剂不含卤素，对迁移高度稳定，耐候性好。该产品的特点是具有高韧性、刚度、极低的吸水率和出色的尺寸稳定性。它具有高流动性，可以填充壁厚较薄的复杂零件。该产品易于加工，具有出色的熔体稳定性。

市场与应用
汽车：汽车电子电气，传感器壳体
E＆E：连接器
消费品：消费类电子产品
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 50 / * cm³/10min ISO 1133
温度 325 / * °C -
载荷 5 / * kg -
模塑收缩率, 平行 1.6 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.7 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 3200 / 3200 MPa ISO 527
断裂应力 60 / 60 MPa ISO 527
断裂伸长率 3.5 / 4 % ISO 527
无缺口简支梁冲击强度, +23°C 45 / 45 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 45 / 45 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 2.5 / 2.5 kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 300 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 130 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 54 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 61 / * E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 V-0 / * class IEC 60695-11-10
测试用试样的厚度 1.6 / * mm -
Yellow Card 现存 是的 / * - -
厚度为h时的燃烧性 V-2 / * class IEC 60695-11-10
测试用试样的厚度 0.4 / * mm -
Yellow Card 现存 是的 / * - -
燃烧性－氧指数 37 / * % ISO 4589-1/-2
电性能干 / 已调节单位Test Standard
ISO数据
相对介电常数., 1MHz 3.5 / 3.5 - IEC 62631-2-1
介质损耗因子, 1MHz 120 / 220 E-4 IEC 62631-2-1
体积电阻率 1E13 / 1E13 Ohm*m IEC 62631-3-1
相对漏电起痕指数 - / 600 - IEC 60112
其它性能干 / 已调节单位Test Standard
吸水性 2.9 / * % 类似ISO 62
吸湿性 1.2 / * % 类似ISO 62
密度 1180 / - kg/m³ ISO 1183
模塑测量的特殊性能干 / 已调节单位Test Standard
ISO数据
粘数 120 / * cm³/g ISO 307, 1157, 1628
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 °C -
预干燥-时间 8 h -
加工湿度 ≤0.05 % -
注塑熔体温度 320 - 340 °C -
模具温度 100 - 160 °C -
典型数据
加工方法
注塑, 其它挤出成型
供货形式
黑色
特殊性能
阻燃的, 无卤, 经热稳处理的/耐热的
特征
熔体强度
耐化学试剂
通用耐化学性
应用
汽车, 电子电气
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型
PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 100 - 160 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.